CNC-machined 5.8mm dia ball joint for anti-roll bar, made from premium lightweight 7075 T6 aluminum. Set of 2. 

XRAY introduces a new 5-cell (6.0V) inline battery pack made from ultra-high performance Intellect IB1400mAh NiMH cells. These 2/3A cells offer low resistance and will maintain their high voltage under load, allowing them to easily provide power to high-powered servos without a performance decrease.  

Longer XT8 chassis is 13mm longer than the standard #351120 chassis, thus moving the weight of the car more forward for better balance. More traction and steering with the forward placement of the engine, center diff housing, and electronics. Increased wheelbase improves the stability of the car. 

CNC-machined graphite front plate for XB8. Countersunk holes for flathead screws. 

Front torque rod set with strong aluminum bar and tough composite balljoints. Includes pivotballs. Factory pre-assembled. 

XRAY has designed a new rigid but lightweight front brace for the XB8, adhering to the legendary attention to detail while also adding strength and saving weight. 

Front shock tower, CNC-machined from premium high-strength 3.5mm thick high-grade graphite for high strength and light weight. Features optimized shock positions and roll center positions. 

Eccentric bushing for I.A.C. (Integrated Adjustable Caster). 0 setting identified by no dot. Made from famous Hudy Spring Steel. Set of 2.  

Eccentric bushing for I.A.C. (Integrated Adjustable Caster). 1° setting (identified by 1 dot) allows for either +1° or -1° caster adjustment depending on the orientation of the bushing. Made from famous Hudy Spring Steel™. Set of 2. 

Eccentric bushing for I.A.C. (Integrated Adjustable Caster). 1 setting (identified by 1 dot) allows for either +1 or -1 caster adjustment depending on the orientation of the bushing. 

Eccentric bushing for I.A.C. (Integrated Adjustable Caster). 2 setting (identified by 2 dots) allows for either +2 or -2 caster adjustment depending on the orientation of the bushing. 

Pivoting ball mount for I.A.C. (Integrated Adjustable Caster). Works in conjunction with eccentric front bushings to create various caster settings in front suspension using the same C-hub block. Set of 2. 

Right steering block CNC-machined from premium lightweight T6 aluminum, polished for luxuriuous and stylish appearance. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions. Composite bushings are used to secure the ball-bearings in both sides of this steering block; this allows the ball-bearings to fit perfectly and turn freely, giving much higher lifetime compared to bearings installed directly into aluminum steering blocks.  

Left steering block CNC-machined from premium lightweight T6 aluminum, polished for luxuriuous and stylish appearance. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions. Composite bushings are used to secure the ball-bearings in both sides of this steering block; this allows the ball-bearings to fit perfectly and turn freely, giving much higher lifetime compared to bearings installed directly into aluminum steering blocks. 

Molded composite bushings for installing ball-bearings in alu steering blocks #352255 and #352265. Set of 4. 

Complete set of front and rear suspension holders, featuring XRAY's innovative patented Integrated Suspension Settings (I.S.S.). Using the integrated eccentric bushings, suspension settings can be completely adjusted for toe-in, kick-up, anti-squat, roll center and inboard toe.  

After extensive development and tests XRAY brings you new suspension holders providing you with new suspension geometry specially designed for flat and bumpy tracks. These new suspension holders were with a great success used at the recent European Championship where XRAY dominated and set TQ.  

Front lower suspension holder for FRONT of front bulkhead. Made from 5mm CNC-machined, highest-grade 7075 T6 aircraft aluminum. Xray stylish black finish with silver edging. 

Front lower suspension holder for FRONT of front bulkhead of XB8-TQ. Made from 7mm CNC-machined, highest-grade 7075 T6 aircraft aluminum. XRAY stylish black finish with silver edging. 

Front lower suspension holder for REAR of front bulkhead. Made from 5mm CNC-machined, highest-grade 7075 T6 aircraft aluminum. Xray stylish black finish with silver edging. 

Front upper suspension holder for REAR of front bulkhead. CNC-machined from highest-grade 7075 T6 Swiss aluminum. XRAY stylish black finish with silver edging.  

Rear lower suspension holder for REAR of rear bulkhead of XB8-TQ. Allows for rear toe-in angles 2-4°. Made from 5mm CNC-machined, highest-grade 7075 T6 aircraft aluminum. XRAY stylish black finish with silver edging. 

Front anti-roll bar, 2.2mm thick. 

Front anti-roll bar, 2.6mm thick. 

Front anti-roll bar, 2.8mm thick. 

Front anti-roll bar, 3.0mm thick. 

Front anti-roll bar, 3.2mm thick. 

CNC-machined narrow steering plate made from high-grade graphite for high strength and light weight. Features several different Ackermann settings for precision steering setup. 

High-strength steering plate bushing. Qty of 2. 

Adjustable M3 turnbuckle made from famous Hudy Spring Steel™. 45mm length. Set of 2. 

Adjustable left & right M5 turnbuckles manufactured from special HUDY Spring Steel™ material for turnbuckles, resulting in stronger turnbuckles with a tougher core. Additionally heat treated for maximum strength, reliability, and long life. Length of 75mm. Set of 2. 

Machined alu countersunk shims for use with ball stud. Set of 10. 

Extra-robust 5mm 7075 machined rear brace is keyed on the rear shock tower and guarantees overall chassis stiffness. Strategically machined to reduce weight. Xray stylish black finish with silver edging. 

Rear shock tower for XT9, CNC-machined from premium high-strength 3.5mm thick high-grade graphite for high strength and light weight. Features optimized shock positions and roll center positions. 

CNC-machined 6.8mm dia mounting pivot ball with shoulder,made from premium lightweight 7075 T6 aluminum. Set of 4. 

CNC-machined 6.8mm dia mounting pivot ball,made from premium lightweight 7075 T6 aluminum. Set of 4. 

Set of molded composite eccentric bushings for alu rear hub carriers #353355 and #353365. The eccentric bushings are used for rear suspension geometry adjustment. Exchanging the bushings allows 9 different geometry settings. Each bushing is marked for easy identification.  

After extensive development and tests XRAY brings you new suspension holders providing you with new suspension geometry specially designed for flat and bumpy tracks. These new suspension holders were with a great success used at the recent European Championship where XRAY dominated and set TQ.  

Rear lower suspension holder for FRONT of rear bulkhead. Made from 5mm CNC-machined, highest-grade 7075 T6 aircraft aluminum. Xray stylish black finish with silver edging. 

Rear lower suspension holder for FRONT of rear bulkhead of XB8-TQ. Allows for rear anti-squat angles 2-4°. Made from 7mm CNC-machined, highest-grade 7075 T6 aircraft aluminum. XRAY stylish black finish with silver edging. 

Rear lower suspension holder for REAR of rear bulkhead. Allows for rear toe-in angles 0°-2°. Made from 5mm CNC-machined, highest-grade 7075 T6 aircraft aluminum. Xray stylish black finish with silver edging. 

Rear lower suspension holder for REAR of rear bulkhead. Allows for rear toe-in angles 2°-4°. Made from 5mm CNC-machined, highest-grade 7075 T6 aircraft aluminum. Xray stylish black finish with silver edging. 

Rear lower suspension holder for REAR of rear bulkhead of XB8-TQ. Made from 5mm CNC-machined, highest-grade 7075 T6 aircraft aluminum. XRAY stylish black finish with silver edging. 

New innovation and new XRAY patent – the XRAY Adjustable Rear Hub. CNC-machined from premium lightweight T6 aluminum, polished for luxuriuous and stylish appearance. Ultra-strong rear upright provides very long life and durability in even the most extreme racing conditions. The rear upright features composite bushings which have the hole positioned off-center, which can be inserted in the bottom of the block where the hinge pin is mounted.  

New innovation and new XRAY patent – the XRAY Adjustable Rear Hub. CNC-machined from premium lightweight T6 aluminum, polished for luxuriuous and stylish appearance. Ultra-strong rear upright provides very long life and durability in even the most extreme racing conditions. The rear upright features composite bushings which have the hole positioned off-center, which can be inserted in the bottom of the block where the hinge pin is mounted.  

The XB8 Mud Scraper is CNC-machined from strong graphite material, and is easily installed on the composite rear hub carriers by the two included screws. The mud scraper is great when running in wet and dirty racing conditions, as it helps to remove mud from the inner part of the wheels, enabling the buggy to jump perfectly. A "must have" for serious racers or anybody bashing in dirt and mud. 

Rear anti-roll bar for XB8, XT8 & GTX8 cars, 1.8mm thick. 

Rear anti-roll bar for XB8, XT8 & GTX8 cars, 2.0mm thick. 

Rear anti-roll bar 2.2mm thick. 

Rear anti-roll bar 2.4mm thick. 

Rear anti-roll bar for XB8 & XT8, 2.5mm thick. Laser-engraved for easy identification.
 

Rear anti-roll bar 2.6mm thick. 

Rear anti-roll bar 3.0mm thick. 

Rear anti-roll bar 3.2mm thick. 

XRAY super lighweight 1/8 off-road lexan wing designed for a perfect fit to XB8 and working in conjuction with the XRAY off-road bodies.  

Aerodynamic rear wing (black) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage. 

Aerodynamic rear wing (orange) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage. 

Aerodynamic rear wing (pink) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage. 

Aerodynamic rear wing (yellow) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage. 

CNC-machined aluminum braces for rear wing mount. Set of 2. 

Alu rear wing shim for XB and XT series buggies and truggies. Provides additional support to prevent wing from pulling off from mounting screws. Set of 2. 

Aluminum center diff mounting plate set designed to increase rigidity and strength. CNC-machined from highest-grade aluminum. Like most main alloy components on the XB8 and XB8-TQ, this plate set is finished in XRAY stylish black with trademark silver edging. Includes composite bushings which eliminates vibration and excessive wear of the diff outdrives. 

CNC-machined graphite upper plate for center diff mounting. Includes composite inserts for brake cam posts. 

CNC-machined graphite upper plate for center diff mounting. Includes composite inserts for brake cam posts. 

Center diff upper mounting plate made from tough molded composite material. 

CNC-machined graphite ventilated brake disk.

When using this graphite brake disk, it is necessary to use hardened steel brake pads (#354121) by themselves without Ferodo fibre-style brake pads glued to them. 

Laser-cut, heat-treated, precision-ground ventilated brake disk for XB8 ensures vibration-free operation. Rotating mass is reduced without sacrificing strength or durability. 

Laser-cut, heat-treated, precision-ground ventilated super-lightweight brake disk for XB8, GTX and XT8 ensures vibration-free operation. 

High-precision, ultra-efficient steel brake pads are one of the best in the market! The steel brake pads are laser cut and afterwards precisely ground on both sides for an ultra-smooth surface finish that guarantees maximum braking efficiency. This set of exclusive brake pads is additionally hardened to increase the life and provide higher stiffness.  

Factory pre-assembled brake pad set for consistent and precise braking. High-precision, ultra-efficient steel brake pads are CNC-machined and precision ground on both sides for an ultra-smooth surface finish to guarantee maximum braking efficiency. 

New ultra-efficient brake pads from special slip-free material. Set of 4. 

The 41-tooth large bevel gear for front differential is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives. 

47-tooth large external spur gear for center differential, precision-machined on a special gear machine. Must be used with Center Diff Shimming Plates (#354032) and Alu. Center Diff Mounting Plate 7075 T6 (3mm) (#354055) because of larger diameter. 

46-tooth large external spur gear for center differential. Precision machined on a special gear machine. 

XRAY offers lightweight CNC-machined center diff outdrive adapters. Made from HUDY toughened steel, the outdrives have been strategically machined to be lighter than standard #355070 center diff outdrive adapters. For serious racers who are conscious of weight savings. 

Alu hardcoated pins for gear differential are CNC-machined from premium lightweight Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Set of 2. 

The unique XRAY Active Differential is a high-performance, adjustable front gear differential for XT8 truggies… vastly improving the truggy’s speed and handling characteristics. The special design of the internal components using different angled segments allows the diff gears to engage on-power to increase the forward traction and stability to the truggy, making it faster and easier to drive. 

Molded case for XRAY Active Diff™ made from XRAY's own special composite mixture. The diff body is hand-ground on a precision grinding machine to ensure maximum roundness, and features a molded-in hard steel diff outdrive ring with a high-tolerance, precision-ground inner hole to ensure super-free turning of the outdrives. 

Standard XRAY Active Diff™ segments are CNC-machined from very tough steel, and have very precisely-machined ‶V※ ramp grooves with 90° angle for easy engagement/disengagement. The segment is hardened to ensure long life and durability. The segments are laser engraved with ‶90°※ for easy and instant recognition. Set of 2. 

XRAY Active DiffT segments are CNC-machined from very tough steel, and have very precisely-machined "V" ramp grooves with 120 angle for easy disengagement adjustment. 

Precision internal gears of the XRAY Active Diff™ are die-cast and pressed from high-grade steel material using very high pressure to ensure a very strong core, and then are specially hardened to ensure minimal wear and longest life. Includes 2 bevel gears and 4 satellite gears. 

The 41T diff bevel gear for XRAY Active DiffT is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives. 

The 43T diff bevel gear for XRAY Active Diff™ is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives. The gears are individually machined on a precision German gear machine and every gear is individually tested and inspected. The diff gear is then laser engraved with ‶Active Diff 43※ for easy and instant recognition. 

Diff outdrives for XRAY Active Diff™ of self-developed, world-renowned HUDY Spring Steel™ – the toughest steel material available – are CNC-machined on precision German long-turn machines. The diff outdrives are additionally ground and strategically lightened to reduce rotating weight. The diff outdrives are then further hardened to ensure maximum strength and longest lifespan. The diff outdrive shafts are additionally precision hand-ground to a very high tolerance to ensure an ultra-smooth tight fit in the diff body and diff gear. Set of 2. 

The active center diff outdrives are CNC-machined on precision German long-turn machines and are manufactured from HUDY toughened steel. The diff outdrives are additionally ground and strategically lightened to reduce rotating weight. 

Precision-ground polished steel pins for XRAY Active Diff™ internal satellite gears. Set of 2. 

Polished chrome pin. Dia. x length = 2mm x 12mm for active diff. Set of 2 pieces. 

Machined internal bevel gear collars for XRAY Active Diff™. Set of 2. 

Super tiny and lightweight CVD drive axle made from world-renown Hudy Spring Steel™ has been strategically machined for toughness and light weight without compromising strength. 

Hardcoated aluminum wheel axle. Set of 2. 

Hardcoated aluminum wheel axle with +1mm offset. Using these wheel axles will increase the overall track width by 2mm, making the car more stable and easier to drive.  

Hardcoated aluminum wheel axles with +2mm offset. Using these wheel axles will increase the overall track width by 4mm, making the car more stable and easier to drive. Set of 2. Wheel axles can be mounted in both front and rear. 

Hardcoated lightweight aluminum wheel axles with +5mm offset. May be used at either front and rear. Set of 2. 

Hardcoated aluminum wheel nut. Set of 2. 

Hardcoated aluminum wheel nut. Ribbed for secure tightening on the wheel axle. Set of 2. 

Hardcoated aluminum wheel nut with cover for XB8 wheels. Using these wheel nuts, you will never have problems anymore with dirt getting into the wheel axle assembly! Fits front and rear wheel axles.  

Super tiny and lightweight CVD universal drive shaft made from world-renown HUDY Spring Steel™ has been strategically machined for toughness and light weight without compromising strength. 

Polished chrome pin for ECS drive shaft, 2.5 x 15.8mm. Specially hand-ground for maximum precision. Set of 2. 

Polished chrome pin with flat spot, 3.0 x 16.8mm. Specially hand-ground for maximum precision. Set of 2. 

Super tiny and lightweight central CVD shaft universal joint made from world-renown Hudy Spring Steel™ and has been strategically machined for toughness and light weight without compromising strength. Fits both front and rear central CVD drive shafts. 

Super tiny and lightweight front CVD universal drive shaft for XT8 made from world-renown HUDY Spring Steel™ has been strategically machined for toughness and light weight without compromising strength. 

Super tiny and lightweight rear CVD universal drive shaft for XT8 made from world-renown HUDY Spring Steel™ has been strategically machined for toughness and light weight without compromising strength. 

The battery cable with switch connects the receiver battery to the receiver by way of an on/off switch. It is delivered together with switch cover.  

CNC-machined graphite radio plate. All screw holes are countersunk. 

Lower inner pivot pins for front or rear. Hardened steel, 4mm thick. Set of 2. 

Lower inner pivot pins only for #352301 Front or #353301 Rear Euros'05 TQ Suspension - Sets. Hardened steel, 4mm thick. Set of 2. 

Front upper pivot pins only for #352301 Euros'05 TQ Front Suspension - Set. Hardened steel, 4mm thick. Set of 2. 

Set of composite molded parts for 2 shock absorbers. Includes spring lower collar and ball joints. Big-bore pistons are manufactured from well-proven specially-formulated composite material to provide smoother action and durability.  

Set of composite molded shims for XB808 shocks. Includes 1.0 & 2.5mm sizes. 

Molded composite shock shaft ball joints for #358072 shock boots. Set of 2. 

Set of composite molded 8- and 10-hole shock pistons for two shock absorbers. 8-hole pistons are available with 2 different-sized holes (1.2 and 1.3mm) for changing damping (2 per piston). 10-hole pistons are available with 1.1mm holes.  

New 4-hole large-bore shock pistons designed specifically for the wider XRAY shock absorbers. The newly-redesigned pistons use a new production process to improve roundness, ensuring perfect piston movement in all four shocks. These pistons have four (4) straight holes (not tapered) in sizes of 1.3mm 1.4mm and 1.5mm in every set. 

Set of composite molded 6-hole shock pistons for 2 shock absorbers. Pistons are available with 3 different sized holes for changing damping: 1.3, 1.4, and 1.5mm holes (2 per piston). Big-bore pistons are manufactured from well-proven specially-formulated composite material to provide smoother action and durability.  

Set of molded composite 6-hole shock pistons for two shock absorbers. These 2-hole big-bore pistons are available with three different-sized holes (1.2, 1.3, and 1.4mm) for different damping characteristics. 

Machined steel upper mounting bushing for shock absorbers. Set of 2. 

Set of composite molded bushing and shims for XB808. 

Set of composite molded bushing and shims for XB8, GTX & XT8 cars. 

CNC-machined pivot ball for mounting shock top mount to shock tower, made from premium lightweight 7075 T6 aluminum. Set of 2. 

CNC-machined steel screw pivot ball for mounting shock top mount to shock tower. Set of 2. 

CNC-machined 1-piece alu shock cap, made from premium lightweight 7075 T6 aluminum. Set of 2. 

Soft rubber folding shock boots keep dirt and debris off the shock rod and out of the shock body. Set of 4. Must be used with #358016 ball joints & #358141 alu shock body nuts on big bore shocks. 

Shock membrane for shock absorbers, made of soft molded rubber. The new shock membranes are now wider to fit the new big-bore shocks.  

Newly designed improved shock membranes provide more consistent feel during long finals with no sign of fade. Shock membrane for shock absorbers, made of soft molded rubber. The new shock membranes are wider to fit the big-bore shocks. The material has been also improved to guarantee the same damping characteristics from the beginning of the race to the end even after excessive loads. Set of 4. 

Complete parts set for assembling 2 big-bore front shock absorbers for XT8 with soft rubber folding shock boots. Includes front blue springs (C = 0.86). 

Black hardcoated aluminum shock body nut. The entire lower shock assembly is secured with the new lower aluminum shock cap which makes assembly/disassembly quick & easy. The aluminum lower cap features a securing groove for external protective folding rubber shock boot. 

CNC-machined shock spring adjustment collar for shock absorbers, made from premium lightweight 7075 T6 aluminum. Set of 2. 

Complete parts set for assembling 2 big-bore rear shock absorbers for XT8 with soft rubber folding shock boots. Includes rear blue springs (C = 0.61). 

Complete set of part for assembling two (2) XT9 rear shock absorbers with soft rubber folding shock boots.  

CNC-machined alu rear shock body for XB808, made from premium lightweight 7075 T6 aluminum. The shock bodies have 18.5mm outside diameter and are externally threaded with an adjustable collar for downstops adjustment. The large 15.3mm inner diameter of the shock bodies ensures proper and consistent shock oil. Set of 2. 

CNC-machined aluminum XT9 rear shock body. Set of 2. 

CNC-machined alu rear shock body for XT8 big bore shock, made from premium lightweight 7075 T6 aluminum. The shock bodies have 18.5mm O.D. and are externally threaded with an adjustable collar for downstops adjustment. The large 15.3mm I.D. shock bodies ensure proper and consistent shock oil flow through the perfectly-round pistons, which move very precisely inside the smoothly-finished interior of the shock body. Set of 2. 

Rear shock shaft for XB808 made from large diameter hardened steel. Polished for smooth operation. Set of 2. 

Rear shock shaft for XT9 made from large-diameter hardened steel. Polished for smooth operation. Set of 2. 

Rear shock shaft for XT8 big bore shock made from large diameter hardened steel. Polished for smooth operation. Set of 2. 

Complete set of 4-shoe clutch system includes flywheel, lightweight medium aluminum clutch shoes, gold (soft) clutch springs, assembly screws, flywheel collar, and flywheel nut. 

13-tooth clutch bell made from HUDY steel, precision-machined on a special gear machine. 

13-tooth clutch bell made from HUDY steel, precision-machined on a special gear machine. 

Alu flywheel for 4-shoe clutch made from Swiss 7075 T6 alu and hardcoated for extra durability. 

CNC-machined flywheel nut for 4-shoe clutch. Made from HUDY Spring Steel™. 

Aluminum Soft clutch shoes for 4-shoe clutch. Set of 4. 

Aluminum Medium clutch shoes for 4-shoe clutch. Set of 4. 

Aluminum Hard clutch shoes for 4-shoe clutch. Set of 4. 

Graphite clutch shoe made from special graphite mixture material.  

Soft clutch springs for 4-shoe clutch. Softer spring allows for earlier engagement. 

Medium clutch springs for 4-shoe clutch. Medium spring allows for good overall engagement point, though with slightly different characteristics in comparison with the soft springs. 

Hard clutch springs for 4-shoe clutch. Hard spring allows for later engagement point. 

Easy to install assembly screws for 4-shoe clutch system. Set of 4pcs. 

High-Torque Clutch set for XB8 is an important performance upgrade. The clutch provides a smoother and more continuous transfer of power from engine at very high RPM.  

14-tooth clutch bell made from HUDY steel. Precision machined on a special gear machine. 

15-tooth clutch bell made from HUDY steel. Precision machined on a special gear machine. 

13-tooth clutch bell made from HUDY steel. Precision machined on a special gear machine, strategically lightened without sacrificing strength or durability. 

14-tooth clutch bell made from HUDY steel. Precision machined on a special gear machine, strategically lightened without sacrificing strength or durability. 

3-pin flywheel made from aluminum. 

Graphite clutch shoe made from special graphite mixture material.  

Steel clutch springs. Wire diameter 1.1mm (hard) for later clutch engagement. Set of 3. 

New soft clutch springs with improved shape helps prevent breakage. Softer spring allows for earlier engagement. 

New hard clutch springs with improved shape helps prevent breakage. Harder spring allows for later engagement. 

New hard clutch springs with improved shape helps prevent breakage. Extra hard spring allows for later engagement. 

Medium clutch springs for High-Torque clutch. Medium spring allows for good overall engagement point, though with slightly different characteristics in comparison with earlier springs. 

Optional hard clutch springs for high-torque clutch, allow for later engagement. Silver color. Set of 3. 

Factory-preassembled 150cc fuel tank set featues a pressure cap with a 1-piece profiled seal for perfect fitment and sealing. The fuel tank includes an internal stone filter and an integrated splashguard to protect the brakes from fuel. 

High grade CNC-machined engine mounts help to dissipate engine heat, black anodized and then milled to create the stylish XRAY luxury look. 

CNC-machined aluminum engine mounts are machined from high-grade lightweight alloy for high strength and increased heat dissipation. The engine mounts are easily adjustable from the bottom of the chassis to obtain proper gear mesh. 

Adjustable engine mount CNC-machined from premium lightweight aircraft aluminum with XRAY sylish black finish and silver edging. The engine mount consists of two pieces: the adjustable bottom mount is affixed to the chassis while the upper mounts are attached to the engine. 

Adjustable engine mount CNC-machined from premium lightweight aircraft aluminum with XRAY sylish black finish and silver edging. The engine mount consists of two pieces: the adjustable bottom mount is affixed to the chassis while the upper mounts are attached to the engine.  

Shims for attaching engine mounts to chassis using flat-head screws. Set of 4. 

Set of 2 single-piece engine mounts CNC-machined from premium lightweight aircraft aluminum, with XRAY stylish black finish and silver edging. The single-piece mounts fit Novarossi, GRP, RB, Max, JP, and Sirio engines. To be used with the Adjustable Engine Mount. 

Set of 2 single-piece engine mounts CNC-machined from premium lightweight aircraft aluminum, with XRAY stylish black finish and silver edging. The single-piece mounts fit Picco, Mega, Orion, LRP and OS engines. To be used with the Adjustable Engine Mount. 

Low-profile air filter set (complete). Includes composite filter elbow, base and cap, and inner/outer foam elements. Also includes tie-wraps and air filter oil. 

Low-profile air filter set (complete). Includes composite filter elbow, base and cap, and inner/outer foam elements. Also includes tie-wraps and air filter oil. 

Molded composite low-profile air filter base and cap. 

Molded composite optional cover for air filter protects the filter and is recommended for muddy and rainy conditions. The cover is a direct fit for the 808 low-profile air filter assembly. 

Inner + outer low-profile foam filter elements, and a tube of air filter oil. 

Inner + outer low-profile foam filter elements, and a tube of air filter oil. Set of 10. 

Large capacity aluminum fuel filter set. This fuel filter is different from others as it is captured in a holder and will not turn as the result of vibration. 

Thick silicone fuel tubing. 2.4mm ID, 1m length. Fluorescent yellow colour. 

XRAY Premium Silicone Oil 100 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 150 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 200 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 250 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 300 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 350 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 400 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 450 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 500 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 550 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 700 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 800 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 900 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 1000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 2000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 3000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 5000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 6000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 8000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 20 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 30 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 40 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 50 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 60 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 80 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 100 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 150 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 200 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 300 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Aerodisk truggy wheels (orange) molded from light yet very durable material and are well suited for high-competition truggy racing. XRAY Aerodisk truggy wheels have offset 19.5. Set of 4. 

XRAY Aerodisk truggy wheels (pink) molded from light yet very durable material and are well suited for high-competition truggy racing. XRAY Aerodisk truggy wheels have offset 19.5. Set of 4. 

XRAY Aerodisk truggy wheels (yellow) molded from light yet very durable material and are well suited for high-competition truggy racing. XRAY Aerodisk truggy wheels have offset 19.5. Set of 4. 

XRAY introduces a new 5-cell (6.0V) inline battery pack made from ultra-high performance Intellect IB1400mAh NiMH cells. These 2/3A cells offer low resistance and they will maintain their high voltage under load, allowing them to easily provide power to high-powered servos without a performance decrease.  

Connection cable for plugging receiver battery pack into the receiver. Standard Futaba J connector on receiver end, micro battery connector on the battery end. 

Flashy orange FireStylin' full-colour graphic set for Truggy dish wheels makes a bright, bold visual statement, setting your car apart from the crowd. Made from die-cut tough, self-adhesive vinyl for easy application and long wear. 

Flashy blue FireStylin' full-colour graphic set for Truggy dish wheels makes a bright, bold visual statement, setting your car apart from the crowd. Made from die-cut tough, self-adhesive vinyl for easy application and long wear. 

Flashy green FireStylin' full-colour graphic set for Truggy dish wheels makes a bright, bold visual statement, setting your car apart from the crowd. Made from die-cut tough, self-adhesive vinyl for easy application and long wear. 

Flashy pink FireStylin' full-colour graphic set for Truggy dish wheels makes a bright, bold visual statement, setting your car apart from the crowd. Made from die-cut tough, self-adhesive vinyl for easy application and long wear. 

Unique custom-made left-thread screws specially developed and designed for use on off-road and truggy arms (for the lower shock mounts) to prevent the screws from turning out due to vibration. To be used only on LEFT REAR arm and RIGHT FRONT arm.  

M4x7 button-head machine screw, hex drive with hex also in the bottom. This screw can be used as optional downstop screw for XB8 kits.  

M3.5x19 flat-head screw, self-tapping, Phillips drive. Set of 10 pieces. 

Flat washer. ID x OD x thickness = 13mm x 16mm x 0.1mm. Set of 10. 

Flat washer. ID x OD x thickness = 6mm x 18mm x 0.3mm. Set of 10. 

Flat washer. ID x OD x thickness = 6mm x 18mm x 0.5mm. Set of 10. 

Flat washer. ID x OD x thickness = 6mm x 10mm x 0.2mm. Set of 10. 

Flat washer. ID x OD x thickness = 6mm x 10mm x 0.3mm. Set of 10. 

Silicone O-ring fits over 6mm shaft. 1.55mm thick. Set of 10.